TGD 3000

Standard thickness gauge for measuring results of thickness on any rubber compound



ISO815 | DIN 53517 | ASTM D 395

The TGD 3000 thickness gauge is a cost efficient and easy to use instrument for measuring the thickness of rubber or rubber-like materials. Featuring a deadweight measurement system, confidence in results is controlled for each test. The TGD 3000 is recommended in the compression testing tools set including MonTech AO 3000 and CS 3000.

Download Brochure  Request Quote

TGD 3000

Standard thickness gauge for measuring results of thickness on any rubber compound

TGD 3000

ISO815 | DIN 53517 | ASTM D 395

Request Quote

The TGD 3000 thickness gauge is a cost efficient and easy to use instrument for measuring the thickness of rubber or rubber-like materials. Featuring a deadweight measurement system, confidence in results is controlled for each test. The TGD 3000 is recommended in the compression testing tools set including MonTech AO 3000 and CS 3000.

Features

The TGD 3000 Thickness gauge is manufactured to close tolerances and performs as a superb quality control instrument. It is crucial that any thickness gauge applies a controlled pressure (kPa) to the material whose thickness is being measured. The TGD 3000 uses a deadweight system removing the uncertainty of other mechanical devices. This system ensures that the thickness is being measured under the same controlled conditions for each sample. This design ensures excellent repeatability of results. To measure the thickness of any sample, lift the deadweight by pressing the cable release or optional lever and insert the material between the anvil and the presser foot.

The deadweight is lowered automatically by releasing the button. From there the thickness reading is obtained. Precise measurements are guaranteed. Optional gauge blocks are available for verifications and calibration.

Technical Specifications

Standards

ISO815 | DIN 53517 | ASTM D 395

Measurement Method

Dead load with constant measuring force (1N standard)

Display

Digital with 9mm LCD display, 0.001mm resolution 

Measurement Table

Polished, 50mm diameter

Measurement Tip

Diameter 5mm standard, others optional

Measurement Range

0 to 12.5mm (25 or 50mm optional)

Repeatability

Better than ± 0.0015mm

Output Interfaces

Serial (RS232) optional

Electrical

Battery powered, SR44, 18,000 hours lifetime

Options

- Various presser foot designs and tips (4, 4.3, 6, 10, 50.5mm, ...)
- Additional dead load weights according to various standards
- Manual lifting lever
- Interface kit and software

Request a Quote